p-spe

A world leader in all aspects of surface preparation. The SPE company was founded in 1983 and to this day remains a family owned business. Our vision was to develop an organization that would be a world leader in all aspects of surface preparation. We were the first company to use the terminology Surface Preparation Equipment, this term becoming the foundation of the group.

The SPE brand is recognized worldwide and the company has gained an enviable reputation for providing the complete surface preparation solution.

9
Yes
None
1
100
/machinery/spe-surface-preparation-equipment/
Thumbnail

Categories:

Grinders Polishers
DFG 250 Floor Grinder

A successful diamond grinder must give the operator complete control and at the same time have enough weight to act directly onto the grinding heads to facilitate accurate and rapid grinding.

  • 250mm (9.8″) working width single head design
  • Powerful 3Ø, gasolene/petrol and diesel options
  • Water can be applied to head for wet grinding

Features

  • Simple foot pedal to raise or lower machine during use.
  • Anti vibration handle bar mounts
  • 50mm dust extraction port
  • Dust free when used with SPE316 vacuum
  • Adjustable rear axle allows for two weighted settings
  • Screw type hand wheel allows machine to be set accurately to the surface
DFG 400 Floor Grinder

The DFG 400 Floor Grinder has been developed to meet the competitive demands of the general floor grinding marketplace.

  • 400mm (15.7″) working width twin head design
  • 1Ø, gasolene/petrol versions
  • Can use carborundum, wire brush and diamond blocks.
DFG 500 Floor Grinder

To successfully grind large floor areas a heavy duty floor grinder is required. The DFG 500 gives complete operator control and at the same time has the correct weight to act directly onto the grinding plates to facilitate accurate and rapid grinding.

  • 500mm (19.7″) working width twin head design
  • 3Ø, high power single and twin speed designs
  • Removeable ballast weights and hydraulic raise/lower facility.

Features

  • Push button hydraulic raise and lower facility
  • Anti vibration handle bar mounts
  • Screw type hand wheel allows machine to be accurately set to the surface
  • 50mm dust extraction port
  • Dust free when operated with SPE316 vacuum
  • Multi purpose
  • Dust free
  • Thermal overload protection
  • Maintenance free
  • Low noise
  • Low vibration
  • Safety start mechanism
DFG 700 Floor Grinder

THE DFG 700 Triple Head Planetary Floor Grinder has been developed to meet the increasing demand for this principle and grinding materials to a finished product.

  • 700mm (27.6″) working width triple head planetary grinder with single or twin speed design
  • Very high production rates on large areas
  • Pivotal weights and quick release drive plate system

Features

  • Heavy duty gearbox drive
  • Grinding heads supported by multi directional flexible coupling
  • Variable grinding speed
  • Robust construction
  • Anti vibration handle bar mount
  • Quick release drive plate system
  • Pivotal weights
  • Can be used with conventional DFG Diamond Plates
DFG 200 Floor Grinder

A successful diamond grinder must give the operator complete control and at the same time have enough weight to act directly onto the grinding heads to facilitate accurate and rapid grinding.

  • 200mm (8″) single head compact grinder
  • Small but powerful, compact easy to transport grinding unit
  • Accepts a wide range of diamond, polymer and PCD attachments.

Features

  • Robust construction
  • 50mm Dust extraction port
  • Dust free when used with suitable SPE dust control vacuum
  • Large diameter wheels for excellent mobility and stability
  • Removable weight to vary grinding pressure
  • Simple adjustment to level to the floor surface
  • Adjustable dust skirt
DFG 460 Floor Grinder

The DFG 460 Triple Head Planetary Floor Grinder has been developed to provide a medium sized, portable, product that grinds to a polished finish using orbital grinder principles.

  • 460mm (18″) working width triple head planetary grinder
  • Powerful medium sized machine suitable for the majority of grinding tasks
  • Designed to be efficient, powerful but also portable

Features

  • Heavy duty gearbox drive system
  • Compact, modern and portable design
  • Adjustable height anti-vibration handlebars
  • Self levelling head design
  • 50mm dust extraction port
  • Large diameter wheels for excellent mobility and stability
  • Dust free when operated with SPE 316 Vacuum
Mixers
Mixit 60

The SPE Mixit 60™ – robust and reliable in heavy duty industrial applications.

The SPE Mixit 60™ Pan Mixer is a forced action mixer designed specifically for heavy duty industrial applications. The mixing pan is driven through a gearbox by either diesel, petrol or electric motor. As the mixing head is lowered the machine automatically starts and then stops as the head is raised. A steel grill panel allows bagged material to be introduced throughout the process. Once mixing is complete, the mix can easily be emptied by using the tipping device.

As well as petrol and diesel models, the Mixit 60 comes in 110v and 220v single phase electric versions and a 380/415v 3-phase electric version.

Mixit 25

The SPE Mixit 25™ – a robust and portable mixing solution for high output, single handed operation.

The SPE Mixit 25™ pan Mixer was developed to mix promptly and effectively a wide range of materials. The mixer is driven by a sealed motor and gearbox providing many years of trouble free operation. An optional perforated paddle is available to increase agitation by forcing material through its perforations. The machine is both robust and portable, offering the user high output and single handed operation.

The Mixit 25 is an electrically driven machine available in both 110v and 220v single phase and also a 3 phase 415v model.

Ride - On Surface Prep
MP 6000

The MP 6000 is a ride on multi-purpose preparation unit specifically designed to perform the most demanding surface preparation tasks with cost effectiveness, durability and ease of use.

  • Very powerful, highly versatile Sit and Ride unit
  • Highly adaptable with blasting, grinding and planer / scarifier head options.
  • Maximum productivity in surface preparation tasks

Features

  • Multifunctional operation
  • Laser guided
  • Three phase power take off to additional equipment
  • Electronic winch to aid loading on to transport
  • Single speed/steer control lever
  • Reverse camera available as optional extra
  • Reduced vibration suspension operators seat
Scarifiers
SP8

High speed, accurate surface preparation at an economical price.

For any surface, for any coating, the SP8 performs with great versatility. It offers high speed, accurate surface preparation at an economical price. The SP8 utilizes a variety of hardened steel or tungsten carbide tipped (TCT) cutters in cage set ups geared for specific needs. Choose from air, gas or electric power supplies.

  • Fine cutting depth adjustment.
  • Tri-tube handle for strength, front carry bar eases transport. Light weight for easy maneuverability.
  • Convenient engine stop switch.
  • Hexagonal drive-shaft and sealed bearings for longer life. Available with air, gas or electric power supply.
  • Isolation mounts to ease operator vibration.
  • Dust control outlet.
BEF 200 Multiplane

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 200 Multiplane Range.

  • 200mm (8″) working width
  • 110,230v,400v 3-phase, gasolene/petrol, diesel and air powered versions
  • Rigid, compact design

Features

  • 50mm dust extraction port
  • Dust free when operated with SPE 316 vacuum
  • Large diameter wheels for excellent mobility and stability
  • Monocoque construction is rigid, strong and accurate
  • Screw type raise and lower control
  • Firm engine mounting plate
  • Front wheels protected from debris
BEF 320 Heavy Duty Multiplane

SPE have an ongoing development programme to produce new innovative equipment. This along with many years experience in the design and operation of surface preparation equipment has been integrated with the latest computer aided design techniques to produce the BEF 320 Heavy Duty Multiplane. It is the most advanced machine of its type.

  • 320mm (12.6″) working width
  • 400v 3-phase, gasolene/petrol, diesel powered versions
  • Heavy duty design for larger projects

Features

  • 50mm dust extraction port
  • Dust free when operated with SPE 316 vacuum
  • Accurate depth control for precision surface textures and maximum cutter life
  • Hydraulic drum raise and lower
  • Infinately variable speed
  • Self propelled hydrostatic drive
  • Forward and reverse controls
  • Up cutting drum for efficiency
  • Monocoque construction/fabrication
BEF 360 Multiplane Skidsteer

With larger contracts comes the need for a larger type of planer. Many years of experience in the design and operation of surface preparation equipment combined with modern computer aided design techniques has resulted in the BEF 360 Skidsteer mounted planer.

  • 360mm (14″) working width
  • Skidsteer mounted, gasolene/petrol powered
  • Extremely rugged design

Features

  • Dust control available
  • Low operator fatigue
  • Contour following head
  • Accurate depth control for precision surface texture and maximum cutter life
  • Side plate access for quick and easy cutter drum removal
BEF 500 Multiplane Skidsteer

With larger contracts comes the need for a larger type of planer. Many years of experience in the design and operation of surface preparation equipment combined with modern computer aided design techniques has resulted in the BEF 500 Skidsteer mounted planer.

  • 500mm (20″) working width
  • Hydraulically driven, skidsteer mounted
  • Designed for maximum performance on large projects

Features

  • Dust control available
  • Low operator fatigue
  • Contour following head
  • Accurate depth control for precision surface texture and maximum cutter life
  • Side plate access for quick and easy cutter drum removal
SP2A

Portable, hand-held, air powered surface grinder/scarifier with up to 2″ (51mm) cutting width. Ideal for paint removal and de-scaling on vertical surfaces and hard to reach areas. Effective for industrial, municipal and marine applications.

Features

Fine cutting depth adjustment.Tri-tube handle for strength, front carry bar eases transport.
Light weight for easy maneuverability.
Convenient engine stop switch.
Hexagonal drive-shaft and sealed bearings for longer life.
Isolation mounts ease operator vibration. Dust control outlet.

Shotblaster
SPE 9G Shot Blaster

The SPE 9G machine has been developed specifically for the preparation of smaller and confined areas.

  • 230mm (9″) working width
  • Maually driven
  • Ideal for smaller projects
  • Optional seal system to vary blast width

Features

  • Blast unit constructed of manganese steel
  • Handle fully adjustable in height
  • Dead man handle automatically starts/stops blast motor and open/closes shot valve
  • Front and rear wheels support wheels fully adjustable in height
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
SPE 9E Shot Blaster

The SPE 9E Super machine is mainly used for the preparation of concrete floors but is equally effective on steel surfaces.

  • 230mm (9″) working width
  • Electrically driven
  • Ideal for smaller projects
  • Optional seal system to vary blast width

Features

  • Blast unit constructed of manganese steel
  • Handle fully adjustable in height
  • Front drive and rear support wheels fully adjustable in height
  • Forward and reverse travel as standard
  • Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components)
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
  • Optional magnetic/steel seal system available
SPE 12E Shot Blaster

The SPE 12E Super is a medium sized machine suitable for all applications of floor surface preparation.

  • 305mm (12″) working width
  • Electrically powered medium sized machine
  • Ideal for most general floor and steel preparation projects
  • Optional seal system to vary blast width

Features

  • Blast unit constructed of manganese steel
  • Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working
  • Blasting width can be reduced for line removal and weld inspection
  • Self propelled variable speed drive allows complete operator control
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
  • Capable of using up to S550 abrasive
  • Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components)
  • Blast wheel can be rotated in both directions (optional extra)
  • Can be dismantled to pass through a 600mm access hole in storage tanks
SPE 16E Shot Blaster

The SPE 16E Super is a medium to large machine for the professional contractor giving high production rates.

  • 406mm (16″) working width
  • Electrically powered, fast and reliable
  • Blast steel to SA 2.5- 3 standards, concrete and asphalt with ease
  • Optional seal system to vary blast width

Features

  • Blast unit constructed of manganese steel
  • Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working
  • Drive wheels are within the width of the blast cabinet
  • Blasting width can be reduced for line removal and weld inspection
  • Self propelled variable speed drive allows complete operator control
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
  • Capable of using up to S550 abrasive
  • Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components)
  • Blast wheel can be rotated in both directions (optional extra)
  • Can be dismantled to pass through a 600mm access hole in storage tanks
SPE 20E Shot Blaster

The SPE 20E Super is a large machine for the serious contractor, ideal for high productivity. Electrically powered. Mainly used for preparation of concrete floors but equally effective on steel surfaces.

  • 508mm (20″) working width
  • Electrically powered, hydraulic dive
  • Fast blast steel to SA 2.5- 3 standards, concrete and asphalt with ease
  • Optional seal system to vary blast width

Features

  • Blast unit constructed of manganese steel
  • Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working
  • Drive wheels are within the width of the blast cabinet
  • Blasting width can be reduced for line removal and weld inspection
  • Self propelled variable speed drive allows complete operator control
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
  • Capable of using up to S780 abrasive
  • Blast wheel can be rotated in both directions (optional extra)
  • Can be dismantled to pass through a 600mm access hole in storage tanks
V2 Series Vertical Shot Blaster

The Vertical Blast Machine Series has been developed mainly for the preparation of vertical steel surfaces. The design of the blast head provides recovery of abrasive by kinetic energy and vacuum providing major benefits over conventional methods.

  • Unique radially traversing design for vertical blasting internal storage tank surfaces
  • 305mm (12″) blast width
  • Blasts up to 2m (80″) from the floor
  • Can be used in oil storage tanks

Features

  • Blast unit constructed of manganese steel
  • Self propelled variable speed drive allows complete operator control
  • Dust free operation
  • Dismantles to fit through 600mm access hole in storage tank
  • Magnetic roller clamp secures unit to steel structure
V3 Series Vertical Shot Blasters

The Vertical Blast Machine Series has been developed mainly for the preparation of vertical steel surfaces. The design of the blast head provides recovery of abrasive by kinetic energy and vacuum providing major benefits over conventional methods.

  • High performance of cleaning of vertical surfaces including internal and external storage tank walls
  • 406mm (16″) blast width
  • Can be used on oil storage tanks

Features

  • Blast unit constructed of manganese steel
  • Self propelled variable speed drive allows complete operator control
  • Dust free operation
  • Blast internal and external walls
  • Magnetic roller clamp secures unit to steel structure
RMS Magnetic Floor Sweeper

The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.

  • Collects ferrous and metallic debris from floor after blasting
  • Simple operation
  • 50 year magnet life

Features

  • Powerful maintenance free magnet
  • Simply operated release mechanism
  • Easy moving and manoeuvring
  • Permanent magnet
  • Adjustable height
STR 701
STR 701 Multipurpose Preparation System

The STR 701 is a rotary preparation machine.

Simple, safe, comfortable to operate and highly effective. Low noise levels (64dB) along with the complete absence of fumes, vibration and dust make the STR 701 the ideal machine for refurb and renovation.

  • Highly versatile multi-purpose floor preparation unit
  • Wide range of tungsten carbide, diamond, silicon carbide discs bloabks and brushes

Features

  • Multi purpose
  • Dust free
  • Thermal overload protection
  • Maintenance free
  • Low noise
  • Low vibration
  • Safety start mechanism
Walk-Behind Multi-Stripper
MS 230 Multistripper

The MS 230 Multistripper has been developed to satisfy the requirements of removing floor coverings from smaller projects and confined areas.
230mm (9″) working width
Ideal for removing carpet and flooring in small confined areas
Compact easily portable design

Features
Fully adjustable chasis to adjust blade angle
Large diameter wheels for excellent mobility and stability
Simple clamp arrangement for quick and easy blade change
Optimum weight distribution to ensure high work rate
Handle height adjustable for operator control

MS 330 Multistripper

Many years experience in the design and operation of surface preparation equipment has been integrated with the latest computer design technology to produce the MS 330 Multistripper.
330mm (13″) working width
High performance flooring removal even in tough conditions
Powerful electric and petrol/gasolene versions that are easy to transport

Features
All support wheels power driven to provide excellent forward traction
Handle height adjustable for operator comfort
Manually operated positive drive clutch for forward drive/freewheel
Minimal operator fatigue
Extremely powerful robust construction
Simple clamp arrangement for quick and easy blade change
Available in a choice of electric or petrol
Blade angle adjustable to suit application

Grinders Polishers
DFG 250 Floor Grinder
A successful diamond grinder must give the operator complete control and at the same time have enough weight to act directly onto the grinding heads to facilitate accurate and rapid grinding. 250mm (9.8″) working width single head design Powerful 3Ø, gasolene/petrol and diesel options Water can be applied to head for wet grinding Features Simple foot pedal to raise or lower machine during use. Anti vibration handle bar mounts 50mm dust extraction port Dust free when used with SPE316 vacuum Adjustable rear axle allows for two weighted settings Screw type hand wheel allows machine to be set accurately to the surface
DFG 400 Floor Grinder
The DFG 400 Floor Grinder has been developed to meet the competitive demands of the general floor grinding marketplace. 400mm (15.7″) working width twin head design 1Ø, gasolene/petrol versions Can use carborundum, wire brush and diamond blocks.
DFG 500 Floor Grinder
To successfully grind large floor areas a heavy duty floor grinder is required. The DFG 500 gives complete operator control and at the same time has the correct weight to act directly onto the grinding plates to facilitate accurate and rapid grinding. 500mm (19.7″) working width twin head design 3Ø, high power single and twin speed designs Removeable ballast weights and hydraulic raise/lower facility. Features Push button hydraulic raise and lower facility Anti vibration handle bar mounts Screw type hand wheel allows machine to be accurately set to the surface 50mm dust extraction port Dust free when operated with SPE316 vacuum Multi purpose Dust free Thermal overload protection Maintenance free Low noise Low vibration Safety start mechanism
DFG 700 Floor Grinder
THE DFG 700 Triple Head Planetary Floor Grinder has been developed to meet the increasing demand for this principle and grinding materials to a finished product. 700mm (27.6″) working width triple head planetary grinder with single or twin speed design Very high production rates on large areas Pivotal weights and quick release drive plate system Features Heavy duty gearbox drive Grinding heads supported by multi directional flexible coupling Variable grinding speed Robust construction Anti vibration handle bar mount Quick release drive plate system Pivotal weights Can be used with conventional DFG Diamond Plates
DFG 200 Floor Grinder
A successful diamond grinder must give the operator complete control and at the same time have enough weight to act directly onto the grinding heads to facilitate accurate and rapid grinding. 200mm (8″) single head compact grinder Small but powerful, compact easy to transport grinding unit Accepts a wide range of diamond, polymer and PCD attachments. Features Robust construction 50mm Dust extraction port Dust free when used with suitable SPE dust control vacuum Large diameter wheels for excellent mobility and stability Removable weight to vary grinding pressure Simple adjustment to level to the floor surface Adjustable dust skirt
DFG 460 Floor Grinder
The DFG 460 Triple Head Planetary Floor Grinder has been developed to provide a medium sized, portable, product that grinds to a polished finish using orbital grinder principles. 460mm (18″) working width triple head planetary grinder Powerful medium sized machine suitable for the majority of grinding tasks Designed to be efficient, powerful but also portable Features Heavy duty gearbox drive system Compact, modern and portable design Adjustable height anti-vibration handlebars Self levelling head design 50mm dust extraction port Large diameter wheels for excellent mobility and stability Dust free when operated with SPE 316 Vacuum
Mixers
Mixit 60
The SPE Mixit 60™ – robust and reliable in heavy duty industrial applications. The SPE Mixit 60™ Pan Mixer is a forced action mixer designed specifically for heavy duty industrial applications. The mixing pan is driven through a gearbox by either diesel, petrol or electric motor. As the mixing head is lowered the machine automatically starts and then stops as the head is raised. A steel grill panel allows bagged material to be introduced throughout the process. Once mixing is complete, the mix can easily be emptied by using the tipping device. As well as petrol and diesel models, the Mixit 60 comes in 110v and 220v single phase electric versions and a 380/415v 3-phase electric version.
Mixit 25
The SPE Mixit 25™ – a robust and portable mixing solution for high output, single handed operation. The SPE Mixit 25™ pan Mixer was developed to mix promptly and effectively a wide range of materials. The mixer is driven by a sealed motor and gearbox providing many years of trouble free operation. An optional perforated paddle is available to increase agitation by forcing material through its perforations. The machine is both robust and portable, offering the user high output and single handed operation. The Mixit 25 is an electrically driven machine available in both 110v and 220v single phase and also a 3 phase 415v model.
Ride - On Surface Prep
MP 6000
The MP 6000 is a ride on multi-purpose preparation unit specifically designed to perform the most demanding surface preparation tasks with cost effectiveness, durability and ease of use. Very powerful, highly versatile Sit and Ride unit Highly adaptable with blasting, grinding and planer / scarifier head options. Maximum productivity in surface preparation tasks Features Multifunctional operation Laser guided Three phase power take off to additional equipment Electronic winch to aid loading on to transport Single speed/steer control lever Reverse camera available as optional extra Reduced vibration suspension operators seat
Scarifiers
SP8
High speed, accurate surface preparation at an economical price. For any surface, for any coating, the SP8 performs with great versatility. It offers high speed, accurate surface preparation at an economical price. The SP8 utilizes a variety of hardened steel or tungsten carbide tipped (TCT) cutters in cage set ups geared for specific needs. Choose from air, gas or electric power supplies. Fine cutting depth adjustment. Tri-tube handle for strength, front carry bar eases transport. Light weight for easy maneuverability. Convenient engine stop switch. Hexagonal drive-shaft and sealed bearings for longer life. Available with air, gas or electric power supply. Isolation mounts to ease operator vibration. Dust control outlet.
BEF 200 Multiplane
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 200 Multiplane Range. 200mm (8″) working width 110,230v,400v 3-phase, gasolene/petrol, diesel and air powered versions Rigid, compact design Features 50mm dust extraction port Dust free when operated with SPE 316 vacuum Large diameter wheels for excellent mobility and stability Monocoque construction is rigid, strong and accurate Screw type raise and lower control Firm engine mounting plate Front wheels protected from debris
BEF 320 Heavy Duty Multiplane
SPE have an ongoing development programme to produce new innovative equipment. This along with many years experience in the design and operation of surface preparation equipment has been integrated with the latest computer aided design techniques to produce the BEF 320 Heavy Duty Multiplane. It is the most advanced machine of its type. 320mm (12.6″) working width 400v 3-phase, gasolene/petrol, diesel powered versions Heavy duty design for larger projects Features 50mm dust extraction port Dust free when operated with SPE 316 vacuum Accurate depth control for precision surface textures and maximum cutter life Hydraulic drum raise and lower Infinately variable speed Self propelled hydrostatic drive Forward and reverse controls Up cutting drum for efficiency Monocoque construction/fabrication
BEF 360 Multiplane Skidsteer
With larger contracts comes the need for a larger type of planer. Many years of experience in the design and operation of surface preparation equipment combined with modern computer aided design techniques has resulted in the BEF 360 Skidsteer mounted planer. 360mm (14″) working width Skidsteer mounted, gasolene/petrol powered Extremely rugged design Features Dust control available Low operator fatigue Contour following head Accurate depth control for precision surface texture and maximum cutter life Side plate access for quick and easy cutter drum removal
BEF 500 Multiplane Skidsteer
With larger contracts comes the need for a larger type of planer. Many years of experience in the design and operation of surface preparation equipment combined with modern computer aided design techniques has resulted in the BEF 500 Skidsteer mounted planer. 500mm (20″) working width Hydraulically driven, skidsteer mounted Designed for maximum performance on large projects Features Dust control available Low operator fatigue Contour following head Accurate depth control for precision surface texture and maximum cutter life Side plate access for quick and easy cutter drum removal
SP2A
Portable, hand-held, air powered surface grinder/scarifier with up to 2″ (51mm) cutting width. Ideal for paint removal and de-scaling on vertical surfaces and hard to reach areas. Effective for industrial, municipal and marine applications. Features Fine cutting depth adjustment.Tri-tube handle for strength, front carry bar eases transport. Light weight for easy maneuverability. Convenient engine stop switch. Hexagonal drive-shaft and sealed bearings for longer life. Isolation mounts ease operator vibration. Dust control outlet.
Shotblaster
SPE 9G Shot Blaster
The SPE 9G machine has been developed specifically for the preparation of smaller and confined areas. 230mm (9″) working width Maually driven Ideal for smaller projects Optional seal system to vary blast width Features Blast unit constructed of manganese steel Handle fully adjustable in height Dead man handle automatically starts/stops blast motor and open/closes shot valve Front and rear wheels support wheels fully adjustable in height Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage
SPE 9E Shot Blaster
The SPE 9E Super machine is mainly used for the preparation of concrete floors but is equally effective on steel surfaces. 230mm (9″) working width Electrically driven Ideal for smaller projects Optional seal system to vary blast width Features Blast unit constructed of manganese steel Handle fully adjustable in height Front drive and rear support wheels fully adjustable in height Forward and reverse travel as standard Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components) Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage Optional magnetic/steel seal system available
SPE 12E Shot Blaster
The SPE 12E Super is a medium sized machine suitable for all applications of floor surface preparation. 305mm (12″) working width Electrically powered medium sized machine Ideal for most general floor and steel preparation projects Optional seal system to vary blast width Features Blast unit constructed of manganese steel Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working Blasting width can be reduced for line removal and weld inspection Self propelled variable speed drive allows complete operator control Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage Capable of using up to S550 abrasive Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components) Blast wheel can be rotated in both directions (optional extra) Can be dismantled to pass through a 600mm access hole in storage tanks
SPE 16E Shot Blaster
The SPE 16E Super is a medium to large machine for the professional contractor giving high production rates. 406mm (16″) working width Electrically powered, fast and reliable Blast steel to SA 2.5- 3 standards, concrete and asphalt with ease Optional seal system to vary blast width Features Blast unit constructed of manganese steel Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working Drive wheels are within the width of the blast cabinet Blasting width can be reduced for line removal and weld inspection Self propelled variable speed drive allows complete operator control Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage Capable of using up to S550 abrasive Fully machined blast wheel support bearing assembly (Eliminates bearing problems and automatically self aligns blast wheel components) Blast wheel can be rotated in both directions (optional extra) Can be dismantled to pass through a 600mm access hole in storage tanks
SPE 20E Shot Blaster
The SPE 20E Super is a large machine for the serious contractor, ideal for high productivity. Electrically powered. Mainly used for preparation of concrete floors but equally effective on steel surfaces. 508mm (20″) working width Electrically powered, hydraulic dive Fast blast steel to SA 2.5- 3 standards, concrete and asphalt with ease Optional seal system to vary blast width Features Blast unit constructed of manganese steel Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working Drive wheels are within the width of the blast cabinet Blasting width can be reduced for line removal and weld inspection Self propelled variable speed drive allows complete operator control Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blast wheel and causing damage Capable of using up to S780 abrasive Blast wheel can be rotated in both directions (optional extra) Can be dismantled to pass through a 600mm access hole in storage tanks
V2 Series Vertical Shot Blaster
The Vertical Blast Machine Series has been developed mainly for the preparation of vertical steel surfaces. The design of the blast head provides recovery of abrasive by kinetic energy and vacuum providing major benefits over conventional methods. Unique radially traversing design for vertical blasting internal storage tank surfaces 305mm (12″) blast width Blasts up to 2m (80″) from the floor Can be used in oil storage tanks Features Blast unit constructed of manganese steel Self propelled variable speed drive allows complete operator control Dust free operation Dismantles to fit through 600mm access hole in storage tank Magnetic roller clamp secures unit to steel structure
V3 Series Vertical Shot Blasters
The Vertical Blast Machine Series has been developed mainly for the preparation of vertical steel surfaces. The design of the blast head provides recovery of abrasive by kinetic energy and vacuum providing major benefits over conventional methods. High performance of cleaning of vertical surfaces including internal and external storage tank walls 406mm (16″) blast width Can be used on oil storage tanks Features Blast unit constructed of manganese steel Self propelled variable speed drive allows complete operator control Dust free operation Blast internal and external walls Magnetic roller clamp secures unit to steel structure
RMS Magnetic Floor Sweeper
The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place. Collects ferrous and metallic debris from floor after blasting Simple operation 50 year magnet life Features Powerful maintenance free magnet Simply operated release mechanism Easy moving and manoeuvring Permanent magnet Adjustable height
STR 701
STR 701 Multipurpose Preparation System
The STR 701 is a rotary preparation machine. Simple, safe, comfortable to operate and highly effective. Low noise levels (64dB) along with the complete absence of fumes, vibration and dust make the STR 701 the ideal machine for refurb and renovation. Highly versatile multi-purpose floor preparation unit Wide range of tungsten carbide, diamond, silicon carbide discs bloabks and brushes Features Multi purpose Dust free Thermal overload protection Maintenance free Low noise Low vibration Safety start mechanism
Walk-Behind Multi-Stripper
MS 230 Multistripper
The MS 230 Multistripper has been developed to satisfy the requirements of removing floor coverings from smaller projects and confined areas. 230mm (9″) working width Ideal for removing carpet and flooring in small confined areas Compact easily portable design Features Fully adjustable chasis to adjust blade angle Large diameter wheels for excellent mobility and stability Simple clamp arrangement for quick and easy blade change Optimum weight distribution to ensure high work rate Handle height adjustable for operator control
MS 330 Multistripper
Many years experience in the design and operation of surface preparation equipment has been integrated with the latest computer design technology to produce the MS 330 Multistripper. 330mm (13″) working width High performance flooring removal even in tough conditions Powerful electric and petrol/gasolene versions that are easy to transport Features All support wheels power driven to provide excellent forward traction Handle height adjustable for operator comfort Manually operated positive drive clutch for forward drive/freewheel Minimal operator fatigue Extremely powerful robust construction Simple clamp arrangement for quick and easy blade change Available in a choice of electric or petrol Blade angle adjustable to suit application

2020 All Rights Reserved © Qodeinteractive